Key points
- Removing the seat on your Kawasaki Z900 is a simple task that can be completed in a matter of minutes with the right tools and instructions.
- The seat lock is located at the rear of the seat, beneath the passenger pillion.
- However, it is recommended to remove the seat at least once a year to clean and inspect the battery and other components.
Removing the seat on your Kawasaki Z900 is a simple task that can be completed in a matter of minutes with the right tools and instructions. Whether you need to access the battery, perform maintenance, or simply clean the seat, this step-by-step guide will provide you with all the necessary information to get the job done quickly and efficiently.
Tools Required
- 10mm socket wrench
- 10mm socket
- Small flathead screwdriver
Step 1: Locate the Seat Lock
The seat lock is located at the rear of the seat, beneath the passenger pillion. It is a small, rectangular keyhole with a plastic cover.
Step 2: Remove the Plastic Cover
Use the small flathead screwdriver to gently pry open the plastic cover. Be careful not to damage the cover or the lock.
Step 3: Insert the Socket Wrench
Insert the 10mm socket wrench into the keyhole and turn it counterclockwise to unlock the seat.
Step 4: Lift the Seat
Once the seat is unlocked, lift it up from the rear of the bike. The seat will pivot forward on a hinge.
Step 5: Unhook the Seat
Once the seat is lifted, unhook it from the front latch. The latch is located at the front of the seat, beneath the fuel tank.
Step 6: Remove the Seat
Pull the seat straight up and away from the bike to remove it.
Step 7: Reinstall the Seat
To reinstall the seat, simply reverse the steps above. Make sure the seat is properly latched at the front and locked at the rear.
Troubleshooting
Seat Won’t Unlock
- Ensure that you are using the correct key.
- Try inserting the key several times and turning it gently.
- If the key still won’t turn, contact a Kawasaki dealer for assistance.
Seat Won’t Lift
- Make sure the seat is unlocked.
- Check if there is any debris or dirt blocking the hinge.
- Apply a small amount of lubricant to the hinge and try lifting the seat again.
Seat Won’t Latch
- Ensure that the seat is properly aligned with the front latch.
- Check if there is any damage to the latch or the seat.
- If the latch is damaged, contact a Kawasaki dealer for replacement.
The Bottom Line: Removing Your Kawasaki Z900 Seat Made Easy
By following these simple steps, you can easily remove and reinstall the seat on your Kawasaki Z900. Whether you are a seasoned mechanic or a beginner, this guide will provide you with the necessary knowledge to complete the task with confidence.
Information You Need to Know
Q: How often should I remove the seat on my Z900?
A: The frequency of seat removal depends on your riding habits and maintenance schedule. However, it is recommended to remove the seat at least once a year to clean and inspect the battery and other components.
Q: Can I ride the Z900 without the seat installed?
A: It is not recommended to ride the Z900 without the seat installed. The seat provides support and stability for the rider, and it also helps to protect the battery and other components from the elements.
Q: What is the torque specification for the seat bolts?
A: The torque specification for the seat bolts is 10 ft-lbs (13.6 Nm).
